Browse Source

Iniital commit

master
Adrian Malacoda 3 years ago
commit
a0f7e80abd
  1. 3
      apt/sources.list.d/docker.list
  2. 11
      cron.d/certbot
  3. 86
      nginx/nginx.conf
  4. 94
      nginx/sites-available/default
  5. 91
      nginx/sites-available/default.dpkg-dist
  6. 25
      nginx/sites-available/etherpad.conf
  7. 27
      nginx/sites-available/forge.monarch-pass.net.conf
  8. 50
      nginx/sites-available/gammapedia.conf
  9. 29
      nginx/sites-available/gitlab.conf
  10. 34
      nginx/sites-available/glitchcity.conf
  11. 25
      nginx/sites-available/hastebin.conf
  12. 30
      nginx/sites-available/hydrocitynet.conf
  13. 29
      nginx/sites-available/matrix.conf
  14. 27
      nginx/sites-available/mediagoblin.conf
  15. 25
      nginx/sites-available/nanoyagi.conf
  16. 26
      nginx/sites-available/optimecapsule.conf
  17. 25
      nginx/sites-available/phpmyadmin.conf
  18. 75
      nginx/sites-available/social.conf
  19. 22
      php/7.0/fpm/pool.d/gammapedia.conf
  20. 22
      php/7.0/fpm/pool.d/infinitypedia.conf
  21. 21
      php/7.0/fpm/pool.d/thornbush.conf
  22. 22
      php/7.0/fpm/pool.d/tpdpwiki.conf
  23. 411
      php/7.0/fpm/pool.d/www.conf
  24. 3
      systemd/system/docker.service.d/overlay.conf
  25. 151
      vsftpd.conf

3
apt/sources.list.d/docker.list

@ -0,0 +1,3 @@
#deb https://apt.dockerproject.org/repo debian-jessie main
deb [arch=amd64] https://download.docker.com/linux/debian jessie stable

11
cron.d/certbot

@ -0,0 +1,11 @@
# /etc/cron.d/certbot: crontab entries for the certbot package
#
# Upstream recommends attempting renewal twice a day
#
# Eventually, this will be an opportunity to validate certificates
# haven't been revoked, etc. Renewal will only occur if expiration
# is within 30 days.
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
0 */12 * * * root test -x /usr/bin/certbot -a \! -d /run/systemd/system && perl -e 'sleep int(rand(3600))' && certbot -q renew --post-hook="service nginx reload"

86
nginx/nginx.conf

@ -0,0 +1,86 @@
user www-data;
worker_processes auto;
pid /run/nginx.pid;
include /etc/nginx/modules-enabled/*.conf;
events {
worker_connections 768;
# multi_accept on;
}
http {
##
# Basic Settings
##
sendfile on;
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 65;
types_hash_max_size 2048;
# server_tokens off;
# server_names_hash_bucket_size 64;
# server_name_in_redirect off;
include /etc/nginx/mime.types;
default_type application/octet-stream;
##
# SSL Settings
##
ssl_protocols TLSv1 TLSv1.1 TLSv1.2; # Dropping SSLv3, ref: POODLE
ssl_prefer_server_ciphers on;
##
# Logging Settings
##
access_log /var/log/nginx/access.log;
error_log /var/log/nginx/error.log;
##
# Gzip Settings
##
gzip on;
gzip_disable "msie6";
# gzip_vary on;
# gzip_proxied any;
# gzip_comp_level 6;
# gzip_buffers 16 8k;
# gzip_http_version 1.1;
# gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript;
##
# Virtual Host Configs
##
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*;
}
#mail {
# # See sample authentication script at:
# # http://wiki.nginx.org/ImapAuthenticateWithApachePhpScript
#
# # auth_http localhost/auth.php;
# # pop3_capabilities "TOP" "USER";
# # imap_capabilities "IMAP4rev1" "UIDPLUS";
#
# server {
# listen localhost:110;
# protocol pop3;
# proxy on;
# }
#
# server {
# listen localhost:143;
# protocol imap;
# proxy on;
# }
#}

94
nginx/sites-available/default

@ -0,0 +1,94 @@
##
# You should look at the following URL's in order to grasp a solid understanding
# of Nginx configuration files in order to fully unleash the power of Nginx.
# http://wiki.nginx.org/Pitfalls
# http://wiki.nginx.org/QuickStart
# http://wiki.nginx.org/Configuration
#
# Generally, you will want to move this file somewhere, and start with a clean
# file but keep this around for reference. Or just disable in sites-enabled.
#
# Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples.
##
# Default server configuration
#
server {
listen 80 default_server;
listen [::]:80 default_server;
server_name _;
return 301 https://$host$request_uri;
}
server {
# SSL configuration
#
listen 443 ssl default_server;
listen [::]:443 ssl default_server;
# https://weakdh.org/sysadmin.html
ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA';
ssl_prefer_server_ciphers on;
ssl_certificate /etc/letsencrypt/live/monarch-pass.net/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/monarch-pass.net/privkey.pem;
#
# Self signed certs generated by the ssl-cert package
# Don't use them in a production server!
#
# include snippets/snakeoil.conf;
root /var/www/html;
# Add index.php to the list if you are using PHP
index index.html index.htm index.nginx-debian.html;
server_name _;
location / {
# First attempt to serve request as file, then
# as directory, then fall back to displaying a 404.
try_files $uri $uri/ =404;
autoindex on;
}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ \.php$ {
# include snippets/fastcgi-php.conf;
#
# # With php5-cgi alone:
# fastcgi_pass 127.0.0.1:9000;
# # With php5-fpm:
# fastcgi_pass unix:/var/run/php5-fpm.sock;
#}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
}
# Virtual Host configuration for example.com
#
# You can move that to a different file under sites-available/ and symlink that
# to sites-enabled/ to enable it.
#
#server {
# listen 80;
# listen [::]:80;
#
# server_name example.com;
#
# root /var/www/example.com;
# index index.html;
#
# location / {
# try_files $uri $uri/ =404;
# }
#}

91
nginx/sites-available/default.dpkg-dist

@ -0,0 +1,91 @@
##
# You should look at the following URL's in order to grasp a solid understanding
# of Nginx configuration files in order to fully unleash the power of Nginx.
# https://www.nginx.com/resources/wiki/start/
# https://www.nginx.com/resources/wiki/start/topics/tutorials/config_pitfalls/
# https://wiki.debian.org/Nginx/DirectoryStructure
#
# In most cases, administrators will remove this file from sites-enabled/ and
# leave it as reference inside of sites-available where it will continue to be
# updated by the nginx packaging team.
#
# This file will automatically load configuration files provided by other
# applications, such as Drupal or Wordpress. These applications will be made
# available underneath a path with that package name, such as /drupal8.
#
# Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples.
##
# Default server configuration
#
server {
listen 80 default_server;
listen [::]:80 default_server;
# SSL configuration
#
# listen 443 ssl default_server;
# listen [::]:443 ssl default_server;
#
# Note: You should disable gzip for SSL traffic.
# See: https://bugs.debian.org/773332
#
# Read up on ssl_ciphers to ensure a secure configuration.
# See: https://bugs.debian.org/765782
#
# Self signed certs generated by the ssl-cert package
# Don't use them in a production server!
#
# include snippets/snakeoil.conf;
root /var/www/html;
# Add index.php to the list if you are using PHP
index index.html index.htm index.nginx-debian.html;
server_name _;
location / {
# First attempt to serve request as file, then
# as directory, then fall back to displaying a 404.
try_files $uri $uri/ =404;
}
# pass PHP scripts to FastCGI server
#
#location ~ \.php$ {
# include snippets/fastcgi-php.conf;
#
# # With php-fpm (or other unix sockets):
# fastcgi_pass unix:/var/run/php/php7.0-fpm.sock;
# # With php-cgi (or other tcp sockets):
# fastcgi_pass 127.0.0.1:9000;
#}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
}
# Virtual Host configuration for example.com
#
# You can move that to a different file under sites-available/ and symlink that
# to sites-enabled/ to enable it.
#
#server {
# listen 80;
# listen [::]:80;
#
# server_name example.com;
#
# root /var/www/example.com;
# index index.html;
#
# location / {
# try_files $uri $uri/ =404;
# }
#}

25
nginx/sites-available/etherpad.conf

@ -0,0 +1,25 @@
server {
listen 80;
listen [::]:80;
server_name etherpad.monarch-pass.net;
return 301 https://$host$request_uri;
}
server {
listen 443 ssl;
listen [::]:443 ssl;
server_name etherpad.monarch-pass.net;
access_log /var/log/nginx/etherpad.monarch-pass.net/access.log;
error_log /var/log/nginx/etherpad.monarch-pass.net/error.log;
location /.well-known/ {
root /var/www/html/;
try_files $uri $uri/ =404;
}
location / {
proxy_pass http://127.0.0.1:8004/;
}
}

27
nginx/sites-available/forge.monarch-pass.net.conf

@ -0,0 +1,27 @@
server {
listen 80;
listen [::]:80;
server_name forge.monarch-pass.net;
return 301 https://$host$request_uri;
}
server {
listen 443 ssl;
listen [::]:443 ssl;
client_max_body_size 100G;
server_name forge.monarch-pass.net;
access_log /var/log/nginx/forge.monarch-pass.net/access.log;
error_log /var/log/nginx/forge.monarch-pass.net/error.log;
location /.well-known/ {
root /var/www/html/;
try_files $uri $uri/ =404;
}
location / {
proxy_pass http://127.0.0.1:8011/;
}
}

50
nginx/sites-available/gammapedia.conf

@ -0,0 +1,50 @@
server {
listen 80;
listen [::]:80;
server_name gammapedia.monarch-pass.net;
return 302 https://$host$request_uri;
}
server {
listen 443 ssl;
listen [::]:443 ssl;
server_name gammapedia.monarch-pass.net;
root /var/www/html/gammapedia;
index index.html index.htm index.nginx-debian.html index.php;
access_log /var/log/nginx/gammapedia.monarch-pass.net/access.log;
error_log /var/log/nginx/gammapedia.monarch-pass.net/error.log;
location / {
try_files $uri $uri/ =404;
}
location = / {
return 302 $scheme://$host/wiki/;
}
location = /wiki {
return 302 $scheme://$host/wiki/;
}
location = /wiki/ {
return 302 $scheme://$host/wiki/Main_Page;
}
location ~ ^\/wiki/.+$ {
rewrite ^/wiki/(.+)$ /w/index.php?title=$1 last;
}
location /pad/ {
proxy_pass http://localhost:9001/;
}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
location ~ \.php$ {
include snippets/fastcgi-php.conf;
fastcgi_pass unix:/var/run/php5-fpm-gammapedia.sock;
}
}

29
nginx/sites-available/gitlab.conf

@ -0,0 +1,29 @@
server {
listen 80;
listen [::]:80;
server_name gitlab.monarch-pass.net;
return 301 https://$host$request_uri;
}
server {
listen 443 ssl;
listen [::]:443 ssl;
client_max_body_size 100G;
server_name gitlab.monarch-pass.net;
access_log /var/log/nginx/gitlab.monarch-pass.net/access.log;
error_log /var/log/nginx/gitlab.monarch-pass.net/error.log;
return 301 https://forge.monarch-pass.net$request_uri;
# location /.well-known/ {
# root /var/www/html/;
# try_files $uri $uri/ =404;
# }
# location / {
# proxy_pass http://127.0.0.1:8001/;
# }
}

34
nginx/sites-available/glitchcity.conf

@ -0,0 +1,34 @@
server {
listen 80;
listen [::]:80;
server_name forums.glitchcity.info glitchcity.info www.glitchcity.info;
return 301 https://$host$request_uri;
}
server {
listen 443 ssl;
listen [::]:443 ssl;
server_name forums.glitchcity.info glitchcity.info www.glitchcity.info;
client_max_body_size 100M;
access_log /var/log/nginx/glitchcity.info/access.log;
error_log /var/log/nginx/glitchcity.info/error.log;
location /.well-known/ {
root /var/www/html/;
try_files $uri $uri/ =404;
}
location / {
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $remote_addr;
proxy_set_header X-Real-IP $remote_addr;
proxy_pass http://127.0.0.1:8002;
}
#location / {
# root /var/www/html/maintenance;
# try_files $uri $uri/ =404;
#}
}

25
nginx/sites-available/hastebin.conf

@ -0,0 +1,25 @@
server {
listen 80;
listen [::]:80;
server_name hastebin.monarch-pass.net;
return 301 https://$host$request_uri;
}
server {
listen 443 ssl;
listen [::]:443 ssl;
server_name hastebin.monarch-pass.net;
access_log /var/log/nginx/hastebin.monarch-pass.net/access.log;
error_log /var/log/nginx/hastebin.monarch-pass.net/error.log;
location /.well-known/ {
root /var/www/html/;
try_files $uri $uri/ =404;
}
location / {
proxy_pass http://127.0.0.1:8005/;
}
}

30
nginx/sites-available/hydrocitynet.conf

@ -0,0 +1,30 @@
server {
listen 80;
listen [::]:80;
server_name hydrocitynet.org www.hydrocitynet.org;
return 301 https://$host$request_uri;
}
server {
# SSL configuration
#
listen 443 ssl;
listen [::]:443 ssl;
server_name hydrocitynet.org www.hydrocitynet.org;
access_log /var/log/nginx/hydrocitynet.org/access.log;
error_log /var/log/nginx/hydrocitynet.org/error.log;
location /.well-known/ {
root /var/www/html/;
try_files $uri $uri/ =404;
}
root /var/www/html/hydrocitynet;
index index.html;
location / {
try_files $uri $uri/ =404;
}
}

29
nginx/sites-available/matrix.conf

@ -0,0 +1,29 @@
#server {
# listen 80;
# listen [::]:80;
# server_name matrix.monarch-pass.net;
# return 301 https://$host$request_uri;
#}
server {
listen 443 ssl;
listen [::]:443 ssl;
client_max_body_size 100G;
server_name matrix.monarch-pass.net;
access_log /var/log/nginx/matrix.monarch-pass.net/access.log;
error_log /var/log/nginx/matrix.monarch-pass.net/error.log;
location /.well-known/ {
root /var/www/html/;
try_files $uri $uri/ =404;
}
location /_matrix {
proxy_pass http://127.0.0.1:8008;
proxy_set_header X-Forwarded-For $remote_addr;
proxy_read_timeout 300s;
}
}

27
nginx/sites-available/mediagoblin.conf

@ -0,0 +1,27 @@
server {
listen 80;
listen [::]:80;
server_name media.monarch-pass.net;
return 301 https://$host$request_uri;
}
server {
listen 443 ssl;
listen [::]:443 ssl;
client_max_body_size 100G;
server_name media.monarch-pass.net;
access_log /var/log/nginx/media.monarch-pass.net/access.log;
error_log /var/log/nginx/media.monarch-pass.net/error.log;
location /.well-known/ {
root /var/www/html/;
try_files $uri $uri/ =404;
}
location / {
proxy_pass http://127.0.0.1:8009/;
}
}

25
nginx/sites-available/nanoyagi.conf

@ -0,0 +1,25 @@
server {
listen 80;
listen [::]:80;
server_name nanoyagi.com www.nanoyagi.com;
return 301 https://$host$request_uri;
}
server {
# SSL configuration
#
listen 443 ssl;
listen [::]:443 ssl;
server_name nanoyagi.com www.nanoyagi.com;
access_log /var/log/nginx/nanoyagi.com/access.log;
error_log /var/log/nginx/nanoyagi.com/error.log;
root /var/www/html/nanoyagi;
index index.html;
location / {
try_files $uri $uri/ =404;
}
}

26
nginx/sites-available/optimecapsule.conf

@ -0,0 +1,26 @@
server {
listen 80;
listen [::]:80;
server_name optimecapsule.com www.optimecapsule.com forums.optimecapsule.com forum.optimecapsule.com;
return 301 https://$host$request_uri;
}
server {
# SSL configuration
#
listen 443 ssl;
listen [::]:443 ssl;
server_name optimecapsule.com www.optimecapsule.com;
access_log /var/log/nginx/optimecapsule.com/access.log;
error_log /var/log/nginx/optimecapsule.com/error.log;
root /var/www/html/optimecapsule;
index index.html;
autoindex on;
location / {
try_files $uri $uri/ =404;
}
}

25
nginx/sites-available/phpmyadmin.conf

@ -0,0 +1,25 @@
server {
listen 80;
listen [::]:80;
server_name phpmyadmin.monarch-pass.net;
return 301 https://$host$request_uri;
}
server {
listen 443 ssl;
listen [::]:443 ssl;
server_name phpmyadmin.monarch-pass.net;
access_log /var/log/nginx/phpmyadmin.monarch-pass.net/access.log;
error_log /var/log/nginx/phpmyadmin.monarch-pass.net/error.log;
location /.well-known/ {
root /var/www/html/;
try_files $uri $uri/ =404;
}
location / {
proxy_pass http://127.0.0.1:8007/;
}
}

75
nginx/sites-available/social.conf

@ -0,0 +1,75 @@
server {
listen 80;
listen [::]:80;
server_name social.monarch-pass.net;
return 301 https://$host$request_uri;
}
server {
listen 443 ssl;
listen [::]:443 ssl;
server_name social.monarch-pass.net;
access_log /var/log/nginx/social.monarch-pass.net/access.log;
error_log /var/log/nginx/social.monarch-pass.net/error.log;
#location /.well-known/ {
# root /var/www/html/;
# try_files $uri $uri/ =404;
#}
location /.well-known/acme-challenge/ {
root /var/www/html/;
try_files $uri $uri/ =404;
}
gzip_vary on;
gzip_proxied any;
gzip_comp_level 6;
gzip_buffers 16 8k;
gzip_http_version 1.1;
gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript application/activity+json application/atom+xml;
# the nginx default is 1m, not enough for large media uploads
client_max_body_size 16m;
location / {
# if you do not want remote frontends to be able to access your Pleroma backend
# server, remove these lines.
add_header 'Access-Control-Allow-Origin' '*' always;
add_header 'Access-Control-Allow-Methods' 'POST, PUT, DELETE, GET, PATCH, OPTIONS' always;
add_header 'Access-Control-Allow-Headers' 'Authorization, Content-Type, Idempotency-Key' always;
add_header 'Access-Control-Expose-Headers' 'Link, X-RateLimit-Reset, X-RateLimit-Limit, X-RateLimit-Remaining, X-Request-Id' always;
if ($request_method = OPTIONS) {
return 204;
}
# stop removing lines here.
add_header X-XSS-Protection "1; mode=block";
add_header X-Permitted-Cross-Domain-Policies none;
add_header X-Frame-Options DENY;
add_header X-Content-Type-Options nosniff;
add_header Referrer-Policy same-origin;
add_header X-Download-Options noopen;
# Uncomment this only after you get HTTPS working.
# add_header Strict-Transport-Security "max-age=31536000; includeSubDomains";
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
proxy_set_header Host $http_host;
proxy_pass http://127.0.0.1:8012;
client_max_body_size 16m;
}
# location /proxy {
# proxy_cache pleroma_media_cache;
# proxy_cache_lock on;
# proxy_ignore_client_abort on;
# proxy_pass http://127.0.0.1:8012;
# }
}

22
php/7.0/fpm/pool.d/gammapedia.conf

@ -0,0 +1,22 @@
[gammapedia]
user = www-data
group = www-data
listen = /var/run/php5-fpm-gammapedia.sock
listen.owner = www-data
listen.group = www-data
;php_admin_value[disable_functions] = exec,passthru,shell_exec,system
;php_admin_flag[allow_url_fopen] = off
pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
chdir = /
php_admin_value[session.save_handler] = memcached
php_admin_value[session.save_path] = "127.0.0.1:11211"
;php_admin_value[error_log] = /home/infinitypedia/log/infinitypedia-error.log
php_admin_flag[log_errors] = on
;php_admin_value[session.save_path] = /home/infinitypedia/tmp/ ;/tmp/
catch_workers_output = yes

22
php/7.0/fpm/pool.d/infinitypedia.conf

@ -0,0 +1,22 @@
[infinitypedia]
user = infinitypedia
group = infinitypedia
listen = /var/run/php5-fpm-infinitypedia.sock
listen.owner = www-data
listen.group = www-data
;php_admin_value[disable_functions] = exec,passthru,shell_exec,system
;php_admin_flag[allow_url_fopen] = off
pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
chdir = /
php_admin_value[session.save_handler] = memcached
php_admin_value[session.save_path] = "127.0.0.1:11211"
php_admin_value[error_log] = /home/infinitypedia/log/infinitypedia-error.log
php_admin_flag[log_errors] = on
;php_admin_value[session.save_path] = /home/infinitypedia/tmp/ ;/tmp/
catch_workers_output = yes

21
php/7.0/fpm/pool.d/thornbush.conf

@ -0,0 +1,21 @@
[thornbush]
user = thornbush
group = thornbush
listen = /var/run/php5-fpm-thornbush.sock
listen.owner = www-data
listen.group = www-data
;php_admin_value[disable_functions] = exec,passthru,shell_exec,system
;php_admin_flag[allow_url_fopen] = off
pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
chdir = /
php_admin_value[session.save_handler] = memcached
php_admin_value[session.save_path] = "127.0.0.1:11211"
php_admin_value[error_log] = /home/thornbush/log/php-error.log
php_admin_flag[log_errors] = on
catch_workers_output = yes

22
php/7.0/fpm/pool.d/tpdpwiki.conf

@ -0,0 +1,22 @@
[tpdpwiki]
user = tpdpwiki
group = tpdpwiki
listen = /var/run/php5-fpm-tpdpwiki.sock
listen.owner = www-data
listen.group = www-data
;php_admin_value[disable_functions] = exec,passthru,shell_exec,system
;php_admin_flag[allow_url_fopen] = off
pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
chdir = /
php_admin_value[session.save_handler] = memcached
php_admin_value[session.save_path] = "127.0.0.1:11211"
php_admin_value[error_log] = /home/tpdpwiki/log/tpdpwiki-error.log
php_admin_flag[log_errors] = on
;php_admin_value[session.save_path] = /home/tpdpwiki/tmp/
catch_workers_output = yes

411
php/7.0/fpm/pool.d/www.conf

@ -0,0 +1,411 @@
; Start a new pool named 'www'.
; the variable $pool can we used in any directive and will be replaced by the
; pool name ('www' here)
[www]
; Per pool prefix
; It only applies on the following directives:
; - 'access.log'
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /usr) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool
; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
; will be used.
user = www-data
group = www-data
; The address on which to accept FastCGI requests.
; Valid syntaxes are:
; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on
; a specific port;
; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
; a specific port;
; 'port' - to listen on a TCP socket to all IPv4 addresses on a
; specific port;
; '[::]:port' - to listen on a TCP socket to all addresses
; (IPv6 and IPv4-mapped) on a specific port;
; '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = /var/run/php5-fpm.sock
; Set listen(2) backlog.
; Default Value: 65535 (-1 on FreeBSD and OpenBSD)
;listen.backlog = 65535
; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions.
; Default Values: user and group are set as the running user
; mode is set to 0660
listen.owner = www-data
listen.group = www-data
;listen.mode = 0660
; When POSIX Access Control Lists are supported you can set them using
; these options, value is a comma separated list of user/group names.
; When set, listen.owner and listen.group are ignored
;listen.acl_users =
;listen.acl_groups =
; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1
; Specify the nice(2) priority to apply to the pool processes (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
; - The pool processes will inherit the master process priority
; unless it specified otherwise
; Default Value: no set
; process.priority = -19
; Choose how the process manager will control the number of child processes.
; Possible Values:
; static - a fixed number (pm.max_children) of child processes;
; dynamic - the number of child processes are set dynamically based on the
; following directives. With this process management, there will be
; always at least 1 children.
; pm.max_children - the maximum number of children that can
; be alive at the same time.
; pm.start_servers - the number of children created on startup.
; pm.min_spare_servers - the minimum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is less than this
; number then some children will be created.
; pm.max_spare_servers - the maximum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is greater than this
; number then some children will be killed.
; ondemand - no children are created at startup. Children will be forked when
; new requests will connect. The following parameter are used:
; pm.max_children - the maximum number of children that
; can be alive at the same time.
; pm.process_idle_timeout - The number of seconds after which
; an idle process will be killed.
; Note: This value is mandatory.
pm = dynamic
; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI. The below defaults are based on a server without much resources. Don't
; forget to tweak pm.* to fit your needs.
; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
; Note: This value is mandatory.
pm.max_children = 5
; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 2
; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1
; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 3
; The number of seconds after which an idle process will be killed.
; Note: Used only when pm is set to 'ondemand'
; Default Value: 10s
;pm.process_idle_timeout = 10s;
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
;pm.max_requests = 500
; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. It shows the following informations:
; pool - the name of the pool;
; process manager - static, dynamic or ondemand;
; start time - the date and time FPM has started;
; start since - number of seconds since FPM has started;
; accepted conn - the number of request accepted by the pool;
; listen queue - the number of request in the queue of pending
; connections (see backlog in listen(2));
; max listen queue - the maximum number of requests in the queue
; of pending connections since FPM has started;
; listen queue len - the size of the socket queue of pending connections;
; idle processes - the number of idle processes;
; active processes - the number of active processes;
; total processes - the number of idle + active processes;
; max active processes - the maximum number of active processes since FPM
; has started;
; max children reached - number of times, the process limit has been reached,
; when pm tries to start more children (works only for
; pm 'dynamic' and 'ondemand');
; Value are updated in real time.
; Example output:
; pool: www
; process manager: static
; start time: 01/Jul/2011:17:53:49 +0200
; start since: 62636
; accepted conn: 190460
; listen queue: 0
; max listen queue: 1
; listen queue len: 42
; idle processes: 4
; active processes: 11
; total processes: 15
; max active processes: 12
; max children reached: 0
;
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' in the query string will return the corresponding
; output syntax. Example:
; http://www.foo.bar/status
; http://www.foo.bar/status?json
; http://www.foo.bar/status?html
; http://www.foo.bar/status?xml
;
; By default the status page only outputs short status. Passing 'full' in the
; query string will also return status for each pool process.
; Example:
; http://www.foo.bar/status?full
; http://www.foo.bar/status?json&full
; http://www.foo.bar/status?html&full
; http://www.foo.bar/status?xml&full
; The Full status returns for each process:
; pid - the PID of the process;
; state - the state of the process (Idle, Running, ...);
; start time - the date and time the process has started;
; start since - the number of seconds since the process has started;
; requests - the number of requests the process has served;
; request duration - the duration in µs of the requests;
; request method - the request method (GET, POST, ...);
; request URI - the request URI with the query string;
; content length - the content length of the request (only with POST);
; user - the user (PHP_AUTH_USER) (or '-' if not set);
; script - the main script called (or '-' if not set);
; last request cpu - the %cpu the last request consumed
; it's always 0 if the process is not in Idle state
; because CPU calculation is done when the request
; processing has terminated;
; last request memory - the max amount of memory the last request consumed
; it's always 0 if the process is not in Idle state
; because memory calculation is done when the request
; processing has terminated;
; If the process is in Idle state, then informations are related to the
; last request the process has served. Otherwise informations are related to
; the current request being served.
; Example output:
; ************************
; pid: 31330
; state: Running
; start time: 01/Jul/2011:17:53:49 +0200
; start since: 63087
; requests: 12808
; request duration: 1250261
; request method: GET
; request URI: /test_mem.php?N=10000
; content length: 0
; user: -
; script: /home/fat/web/docs/php/test_mem.php
; last request cpu: 0.00
; last request memory: 0
;
; Note: There is a real-time FPM status monitoring sample web page available
; It's available in: /usr/share/php5/fpm/status.html
;
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping
; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong
; The access log file
; Default: not set
;access.log = log/$pool.access.log
; The access log format.
; The following syntax is allowed
; %%: the '%' character
; %C: %CPU used by the request
; it can accept the following format:
; - %{user}C for user CPU only
; - %{system}C for system CPU only
; - %{total}C for user + system CPU (default)
; %d: time taken to serve the request
; it can accept the following format:
; - %{seconds}d (default)
; - %{miliseconds}d
; - %{mili}d
; - %{microseconds}d
; - %{micro}d
; %e: an environment variable (same as $_ENV or $_SERVER)
; it must be associated with embraces to specify the name of the env
; variable. Some exemples:
; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
; %f: script filename
; %l: content-length of the request (for POST request only)
; %m: request method
; %M: peak of memory allocated by PHP
; it can accept the following format:
; - %{bytes}M (default)
; - %{kilobytes}M
; - %{kilo}M
; - %{megabytes}M
; - %{mega}M
; %n: pool name
; %o: output header
; it must be associated with embraces to specify the name of the header:
; - %{Content-Type}o
; - %{X-Powered-By}o
; - %{Transfert-Encoding}o
; - ....
; %p: PID of the child that serviced the request
; %P: PID of the parent of the child that serviced the request
; %q: the query string
; %Q: the '?' character if query string exists
; %r: the request URI (without the query string, see %q and %Q)
; %R: remote IP address
; %s: status (response code)
; %t: server time the request was received
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %T: time the log has been written (the request has finished)
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
;slowlog = log/$pool.log.slow
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0
; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever
; possible. However, all PHP paths will be relative to the chroot
; (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot =
; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
chdir = /
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environement, this can cause some delay in the page
; process time (several ms).
; Default Value: no
;catch_workers_output = yes
; Clear environment in FPM workers
; Prevents arbitrary environment variables from reaching FPM worker processes
; by clearing the environment in workers before env vars specified in this
; pool configuration are added.
; Setting to "no" will make all environment variables available to PHP code
; via getenv(), $_ENV and $_SERVER.
; Default Value: yes
;clear_env = no
; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5
; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp
; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
; php_value/php_flag - you can set classic ini defines which can
; be overwritten from PHP call 'ini_set'.
; php_admin_value/php_admin_flag - these directives won't be overwritten by
; PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.
; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /usr)
; Default Value: nothing is defined by default except the values in php.ini and
; specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/fpm-php.www.log
;php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M

3
systemd/system/docker.service.d/overlay.conf

@ -0,0 +1,3 @@
[Service]
ExecStart=
ExecStart=/usr/bin/dockerd -s overlay -H fd:// -g /srv/kabukicho_data/docker

151
vsftpd.conf

@ -0,0 +1,151 @@
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone? vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=NO
#
# This directive enables listening on IPv6 sockets. By default, listening
# on the IPv6 "any" address (::) will accept connections from both IPv6
# and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
# sockets. If you want that (perhaps because you want to listen on specific
# addresses) then you must run two copies of vsftpd with two configuration
# files.
listen_ipv6=YES
#
# Allow anonymous FTP? (Disabled by default).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in your local time zone. The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories. See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty. Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
ssl_enable=NO
Loading…
Cancel
Save